Category Archives: Home Builders

How to Keep Your Home Warm Without Breaking the Bank

Man Fixing HeaterFamilies see their homes as a place to relax and de-stress after a long day at work or school. Therefore, keeping the home warm and comfortable, especially during winter, is one of the top priorities of every homeowner.

Below are a few useful tips on how you can keep your home comfortable during the cold months without spending a fortune. 

Maintain and repair your furnace.

Your furnace serves as your source of heat during winter. Make sure to have a furnace service expert like to check it regularly, so you won’t have to worry when the cold days come. Keep their number handy to make it easier to contact them for urgent repairs. A trustworthy maintenance specialist will provide you with accurate diagnosis and resolution at a reasonable cost.

Use timers.

Nobody wants to find themselves paying a fortune for their high electricity bills. Make sure to set the timer on heating appliances to avoid this. One way to cut down on electric costs is to turn off the heating when no one is at home. Meanwhile, you can leave it on at a low setting when everyone’s home and keep it at that all day, since it costs more to keep turning it on and off.

Use bubble wrap or plastic films.

About 25% of the heat inside your home gets out through sliding doors and windows. That is 25% of heat you have been paying for going to waste. To eliminate this loss, you can cover windows and sliding doors on the patio with plastic film or bubble wrap. Not only is this effective, but it’s also easily accessible and affordable.

With all the available solutions to keep your home warm and comfortable during the winter, doing so is not that hard. However, it would be best to get your home ready before winter sets in.

Remodeling the Kitchen: Is It Time to Do It?

A modern kitchen designHave you been noticing that your kitchen is no longer as functional as it originally is? If the answer is yes, then perhaps it’s time to give it a facelift.

If you’re still having second thoughts about the idea, here are some good reasons you should do it anyway:

Provides More Space

Over years of use, the kitchen may look cramped and crowded. It could be because it’s no longer fit for today’s set up. When that happens, the best thing you could do is consider renovating it to free up some space. Most kitchen remodeling projects in Fort Wayne, for example, are reeling into the idea of minimalism to save more space and provide better access to their cooking area.

Upgrades Function and Reliability

One of the most basic reasons homeowners welcome the idea is to make their cooking space more efficient. Many of the appliances you’ve bought 10 to 15 years ago may not be as functional as those that are available today. With various advancements in technology, modern devices are becoming more energy-efficient, which then provides you with long-term savings. Unlike when you stick with your outdated appliances that require constant repairs, upgrading to a new one a smart choice.

Enhances Home Value

Increase in home value and property marketability is the other reason many homeowners renovate their kitchen. An attractive and well-designed cooking space will attract more potential buyers when you decide to sell your house.

Improves the Quality of Life

Many homeowners complain that their kitchen is a mismatch to what they actually need. Most of them are in need of particular features that are not present in their existing kitchen. These types of additions could be achieved through renovation or redecorating.

Some people are reluctant to the idea of renovating their kitchen because they often think of the expenses. Instead of simply considering the upfront cost, try looking at it on a long-term view. You’ll be surprised at how much improvement and savings it could give you in the future. Just be sure to consult an expert as you go through the process to avoid committing major investment mistakes.

Indoor Flooding: Many Cases are Highly Preventable

Flood at homeEveryone needs an uninterrupted supply of water at home to keep things running smoothly and conveniently. From preparing food to washing the dishes, and from doing the laundry to cleaning the house – there are just so many roles that constant water flow plays in a person’s life.

But the need for this great amount of water should also mean ensuring its proper and secure containment. Your home’s plumbing system takes full responsibility for this, and as a homeowner, you are responsible for taking care of this important component of your property. Failure to do so increases the possibility of an indoor flooding taking place and damaging your home.

Keeping things in check before they cause greater damage

Many cases of indoor flooding caused by plumbing issues are preventable through early detection of faults within pipes and drainages. With the help of professional and experienced plumbers in Utah, you can minimize your risks of facing such destructive forces. Whipple Service Champions notes that the pros will discover which areas of the system have the potential of causing flooding. Not only do they have the knowledge and skills to locate these faults; they also have the latest technology that makes their tasks easier and quicker to carry out.

A highly preventable disaster

Not all cases of indoor flooding are preventable, but those resulting from malfunctioning plumbing systems are. Natural phenomena, such as heavy rains, storms, and snow can also lead to flooding and the sad truth is, many of today’s water damage claims are due to indoor flooding caused by faulty water supply and drainage pipes. This doesn’t even include the cost of cleanup and restoration services.

Your home is more than just one of your biggest investments; it’s also where you spend quality time with your loved ones. As such, you must keep it safe and secure, and having an optimally working plumbing system is key to achieving this goal.

4 Incredibly Simple Tips to Get Your Home Winter-Ready

Man checking the furnaceDoes the arrival of winter excite you? Neither does it many people. Nobody likes the biting cold that comes with the season.  But that is not the only bad news winter brings. There is the increased power bill for keeping your indoors warm and comfortable, as well as the allergies, and so on.

By following these easy tips, however, you can make sure that winter does not catch you off-guard.

Get the furnace ready

The one appliance you are going to need most during the cold months is your furnace. It is easy to forget this important item during the warmer months till winter comes knocking.

Avoid the last minute rush by having a professional in heating service here in Gloucester, New Jersey take a good look at your furnace and tune it well before winter sets in.

Invest in weather stripping

If there are cracks and other openings that can let cold air into your house, seal them immediately.  Areas you need to inspect carefully include those around your doors and windows.

If you cannot see the openings using your eyes, try holding a candle near the suspect areas and see if the flame blows towards you.

Install a door sweep

A lot of warmth can escape from your house through the lower edge of your door. One of the ways to prevent this is by installing a door sweep. The door sweep is usually attached to the edge of your door, keeping the warmth in and preventing cold air from getting into the house.

Ensure you have snow-cleaning equipment

Take stock of your current snow-cleaning equipment and find out what more you need to buy. Keep a snow shovel, snow blower and any other equipment you will need for the season ready. Confirm whether you have adequate rock salt and deicer, and more early if you need to.

You need not wait until the last minute to rush to make your home winter-ready. By starting to prepare early enough, you can make sure you are ready for the cold months by the time the snow starts falling.

Identifying When to Repair or Replace Appliances

Man Repairing DishwasherAre you wondering if you should have an appliance repaired or replaced? Both actions seem like a good idea, but before making a choice, there are a handful of things to consider. Experts on appliance service in Salt Lake City weigh in on the following factors to think about on whether you should fix or replace appliances.

Average Useful Life of Appliances

Most appliances stop working because they have maximized their useful life. Knowing the lifespan of these items allows you to determine whether to fix or replace one. Here are some approximates:

1. Air Conditioner – 15 years

2. Refrigerator – 9 years

3. Dishwasher – 9 years

4. Washer – 10 years

5. Microwave – 9 years

These are only a handful of the many appliances you probably have. While ACs can last for 15 years, this doesn’t mean it will truly last that long. It could have a shorter lifespan depending on certain factors, such as regular maintenance, minor repairs, and usage.

Extent of the Damage and Usage Rate

Another set of factors to consider is the extent of damage and how much you use it. Certain types of damage are worse than others and repairing or replacing a part may cost more than buying a new one.

If your oven has accumulated a substantial amount of rust on its inner sides, it may be too costly to repair. Once the compressor of your refrigerator ceases to work, it’ll cost around $500. With that price tag, you’re better off buying a new one. A washer that no longer spins needs substantial dismantling, as well.

Weigh the pros and cons of repairing or replacing an old appliance. If it costs too much to fix it, you might as well get a new one.

Categories of Indoor Water Damage

Water Damaged HouseLeaking roofs, flood waters, overflowing drains and burst pipes can wreak havoc in buildings. The upholstery and carpets’ textile can quickly absorb and hold water. This creates a breeding ground for bacteria and fungi. Clean-ups after water damage are extremely labor-intensive and technical.

Time is crucial in the restoration and preservation of your carpets and upholstery. In Salt Lake City, professional carpet cleaning from service providers such as Anchor Water Damage and Restoration will mitigate the damage. Indoor flooding has three levels of severity. Here are these divisions and how each one can affect your carpet.

Sanitary Water Damage

This is usually water damage from a “clean-water” source. It typically comes from washing machines, dishwashers, faucets and water heaters. This damage poses no health hazards to humans. Affected carpets need disinfection and thorough drying by professional cleaners. It will prevent bacteria and mold growth in the long term.

Unsanitary Water Damage

Also called “gray-water” damage, category 2 refers to water from a source that contains significant amounts of physical, chemical and biological contaminants. These include lines that discharge water from toilets, dishwashers and washing machines. Gray-water damage poses a threat to human health. Affected areas require thorough cleaning and sanitation.

Black-Water Damage

This denotes flooding from extremely unsanitary and bio-hazardous sources. Those include liquids that contain chemicals, agricultural runoff, and raw sewage. Expert training and specialized equipment are a requirement for complete drying and remediation. One should immediately replace any carpet affected by black water damage as it poses a very dangerous health hazard.

If you leave carpets sitting in gray water for over 48 hours, they will also need replacing. Water damage is a potential problem for any property owner. Have a water damage restoration company with the right equipment and expertise in carpet cleaning on your contact list. You never know when emergencies will arise.

Common Types of Flat Roof Systems

House With Flat RoofA roof is a must-have for any building. If you are wondering which material is best for your flat roof, there are so many options to choose from. Many people, when faced with a broad range of choice and not the slightest know-how, leave the decision to their contractors and architects. It, however, helps to know even some basic roofing techniques. Here are some of the typical roofing systems for flat roofs:

EPDM rubber

Ethylene propylene diene monomer is a type of rubber roofing in Lancaster, PA made from natural gas and oil. It is the most common material for flat roofs because it is inexpensive and easy to install. It is also resistant to UV rays and requires no mineral coating after application.

Modified Bitumen

Modified bitumen is a multi-ply roofing system that consists of a base layer, ply overlap and granule top surface. It is a strong material with heat welded seams which make the adhesions better compared to other roofing materials. Its appearance is however not as clean and smooth as other flat roofing systems.

Tar and Gravel

This is typically used for flat roofs with 2-in-12 pitches. The roofs are built from interchanging layers of tar or hot asphalt, and heavy roofing felt. Roofers use a protecting mineral coating such as mica or gravel to finish the roof. Tar and gravel roofs are graded according to the number of installed layers often from 3-5.

Other materials used for flat roofs include felt, TPO {thermoplastic polyolefin} and metal. Remember that the success of your roofing system is a combination of a quality product and an experienced roofing contractor. Get a skilled roofer to guide you on the best material for your roof so that it can withstand whatever harsh elements that come in its way.

3 Basic Pool Sanitation Tips

A Pool Being CleanedThe secret to keeping your pool clean is regular maintenance. Maintenance doesn't have to be back-breaking labor. All it takes is s few minutes every week. If you regularly fix small problems as they crop up and with the help of swimming pool repair experts in Salt Lake City, your pool could last you for many more years to come. Here are some basic pool maintenance practices you can do:

Balance the pool

Balancing your pool means that the water should have just the right alkalinity as well as calcium hardness levels. Balancing your water keeps your filtration system running smoothly and prevents metal corrosion.

Chlorinate the pool

For proper sanitation, the chlorine level of your pool should be between 1 and 4 ppm. This prevents algae and bacteria from accumulating. You have a wide array of products you can use to chlorinate your pool. You can use chlorinating tabs, liquid chlorine or chlorinating granules. Take note that these products have different diffusion rates so make sure you know how long you would need to wait before it's safe to jump into the water. Swimming in heavily chlorinated pools can cause a host of adverse health effects so be careful.

Shock the pool

Shock your pool on a weekly basis to get rid of contaminants in the water. Shocking your pool means adding chemicals to your pool to raise free chlorine levels. Doing so keeps your pool sanitary and crystal clear.

A home pool is a great way of keeping fit and cooling off during those hot summer months. Make sure your pool stays clean by regularly sanitizing and maintaining your pool.

The 2 Most Critical Considerations in Finding Emergency Glass Services

Emergency glass repair employee ready to workEvery home is prone to emergencies, and that includes shattered windows and broken doors. Regardless of the cause, all you need to do is have someone repair the damage in the shortest time possible.

Doing so early enough will save you the worry that the broken door or shattered window could compromise heating and cooling, as well as the security of your premises. Auckland Glass Ltd stresses the importance of finding the right contractor for the job. Below are the key areas you will find useful when looking for the best emergency glass repair specialist on the market.

24-Hour Availability

The glazing service provider should be okay with their clients calling them any time of the day and night for enquiries and service requests. The company should likewise be able to attend to your needs professionally. That does not mean the glazing repair work should cost you more; your contractor should not change their service fees now that you have an emergency.

Comfort and Security

It is important to confirm if the glazing expert includes temporary boarding and storage in their emergency service package. Doing so will help ensure that you and your valuables are secure until the pros fix your broken door or window. In this case, you will want to work with a glazing company that uses cutting-edge tools and techniques to conduct fast yet safe glazing repair work. This way, you can resume business or return to your house in no time.

Remember, it is the responsibility of the contractor to ensure that you get the necessary repairs in the shortest time possible. However, timeliness, security and comfort are not all you should consider. Check the contractor’s level of professionalism, communication skills and compliance with industry standards to enjoy services worth your investment.

3 Safe & Easy Ways to Get Rid of Mold in Your Home

man using chemical agents to eradicate mold infestationMold and mildew are some of the few things any homeowner would never wish to see in their houses. It’s not good for their family’s health and can cause serious and costly damages to their property. As such, if they could do something to completely stop the growth of these fungi, they are more than willing to do it. So if you’re currently looking for ways to improve your home’s defense against these unsightly and unhealthy fungi, here are some tricks you could follow, according to mold restoration service providers in Salt Lake City:

Get Rid of Moisture

Mold and mildew often flourish in damp and humid areas. These organisms thrive in moist areas, making it a perfect breeding ground. That’s why the very first thing to do is to keep every corner of your house dry as much as possible. In places where it is unavoidable (e.g., the bathroom, laundry area, kitchen sink), be sure to dry them completely after use and put proper ventilation in the area. To reduce the humidity in your place, a dehumidifier should help.

Clean Thoroughly

Never miss a spot when cleaning your home. Pay extra attention to areas where mold and mildew will most likely develop. When it comes to cleaning the area, avoid using strong chemical solutions. It might stain or damage your furniture and floors. Instead, experts recommend the use of natural or inexpensive cleaning solutions. Examples include ammonia, baking soda, bleach, borax, and vinegar. Additionally, a deodorizer should leave your home looking and smelling fresh.

Let Professionals Takeover

If you notice that there’s a persistent infestation of mold in your home, the best thing to do is to seek help from mold remediation experts. These professionals offer comprehensive mold restoration services, which cover removal and treatment to deter the growth of fungi in your home.

Deal with mold and mildew as early as possible. Follow these steps to ensure the safety of your family as well as keep your home’s structure intact. Control the moisture level in your home, clean all areas regularly, and have pros inspect your place to prevent the development of these organisms.